Posts Tagged ‘Morocco’

Flying carpets in Agadir

May 15, 2012

Yep, it’s magic.

Taghazout surfing salam

May 2, 2012

In a picturesque surf town, ignoring globalism so far…

Blues strike back

April 16, 2012

After a short trip in a strange orange world, let’s get back to the real world. Small but fun waves at Mystery point, la source and Anka point. Winter surfing on the rocks literally.

Surfer mirage is a double exposure, I shot the ruins of the Almadraba first and then i turned to the ocean and shot the spot.

Banana village

March 29, 2012

Redscale photography needs a lot of light. If you’re using a SLR cam you’ll have an exposure meter plus full access to shutter speed, aperture and ISO controls. You can nearly find an infinity of combinations for the desired exposure. Piece o’ cake.

However, lomo or toy cams often do not provide as much control. My Sprocket Rocket has only two apertures and one fixed shutter speed at 1/100 s (there is also the bulb mode, but no ISO control and no exposure meter at all). That leaves only a few combinations, so it’s harder to find a good exposure… To compensate the lack of ISO control, you can set it up to the biggest aperture (even on a sunny day), and try to include a source of light at an edge of the picture (beware of flare). If it’s still too dark, switch to the bulb mode (don’t forget your pocket tripod!). It’s a bit easier with the Holga because it can open to f/8, versus f/10.8 for the Sprocket Rocket. Just practice!

Taghazout redscale

March 22, 2012

A warmed stroll from Anchor Point to Taghazout heights.

In redscale photography the film is loaded backwards. The light has to pierce through the back of the film (the red layer), which is now on top.  The blue layer, consequently in the bottom, is left unexposed. The result is a dramatic color shift, with warm red, orange and yellow tints, depending on the exposure.

An under exposed redscale film will be dark with intense red and orange tones, while an over exposed one will be golden, with sparkling orange and yellow tones (sometimes you can also get greens and blues, but you will need a lot of light in order to pierce the thick filter). But there’s also a trick to find a correct exposure: always over expose it, from 1 to 3 stops!